Please use this identifier to cite or link to this item: https://dspace.udpu.edu.ua/handle/123456789/13472
Title: ДО РОЗРАХУНКУ ЗАЛІЗОБЕТОННИХ ПЛИТ ЗА ДОПОМОГОЮ СТРИЖНЕВОЇ АПРОКСИМАЦІЇ
Other Titles: CONCRETE DEFORMATION DIAGRAMS OF THE NEW GENERATION TENSILE BENDING AND THEIR MECHANICALCHARACTERISTICS
Authors: Азізов, Талят Нуредінович
Кочкарьов, Дмитро Вікторович
Keywords: стрижнева апроксимація
залізобетонні плити
деформаційна модель
жорсткість
Issue Date: 2020
Publisher: НУВГП
Citation: Азізов Т. Н. До розрахунку залізобетонних плит за допомогою стрижневої апроксимації / Т. Н. Азізов, Д. В. Кочкарьов // Вісник НУВГП. Технічні науки : зб. наук. праць. – Рівне : НУВГП, 2019. – Вип. 4(88). – С. 137-146.
Series/Report no.: УДК;624.012.45
Abstract: Deflections of reinforced concrete slabs are determined by many modern methods of calculation significantly different from the experimental ones. So the plate, calculated with the nonlinear properties of the materials has a theoretical deflection, less experimental deflection. This is due in the first place to the fact that insufficient consideration of the change in stiffness due to the formation of cracks. The calculations on the vast majority of existing theories give a good match with the experimental data. However, they usually do not take into account the effect of normal cracks on the change in the stiffness of the section. The use of elasticity theory formulas can only be justified when calculating in the elastic stage and cannot be applied to fracture calculations. The finite element method (ITU) calculation is most acceptable.
Description: Наведено методику розрахунку суцільних плит за допомогою перехресно-стрижневої апроксимації. Наведено методику визначення крутильних жорсткостей стрижневий системи. Показано, що при зміні кроку стержнів в стрижневій системі в порівнянні з базовим кроком слід коригувати значення крутильних жорсткостей стрижнів. Наведено формулу для такого коригування. Показані переваги стрижневої апроксимації при розрахунку залізобетонних плит в зв'язку з вивченістю зміни крутильних жорсткостей стрижневих елементів від тріщиноутворення і малою вивченістю плитних елементів.
URI: https://dspace.udpu.edu.ua/handle/123456789/13472
Appears in Collections:Факультет інженерно-педагогічної освіти

Files in This Item:
File Description SizeFormat 
Стаття Азізов 2020.pdf651,69 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.